Systems for F410 boxes and similar

Area in which loose products (not yet boxed) are prepared by an operator. In this area, product protections may be inserted by hand if required.

Area in which products are measured automatically or by hand in order to indicate the dimensions of the box to be produced to the packaging machine.

Area dedicated to the production of customised boxes with a Panotec packaging machine.

If the production process requires large batches, the boxes can be supplied by a box manufacturer and stored on pallets/racks next to the coupling station run by the operator.

Area in which the automatic box bottom forming modules are located, mainly for F410, F401 model boxes or bottom and lids. An operator must form the box manually if this area is not automated.

Area where the product is manually inserted by the operator into the box, which has been pre-formed previously by the FM410 forming module.

Area in which the boxes are closed with the product. It is possible to use the automatic closing module using Hot Melt glue or using adhesive tape.

Area in which the pack is automatically labelled. Various labelling options are available: On the side, on the lid, at 90°, etc. It is also possible to have the label applied by hand by an operator.

This is normally the last station that makes up a system; it can achieve a high level of automation thanks to the presence of robots and can handle numerous pack unloading bays.